How Big Should a Farm Shop Be? Sizing Your Shop or Machine Shed for the Equipment You'll Own Next
Ask anyone who put up a shop or machine shed 15 years ago what they'd change, and you'll hear the same word almost every time: bigger. Wider so they could turn around inside. Taller so the combine fits with the bin extensions up. More doors, bigger doors, more room to work on one machine while the next one waits.
It's an easy mistake to make, and an expensive one to live with. Equipment never gets smaller. The planter, sprayer and combine you buy in ten years will be bigger than the ones in your yard today, and the building you put up now has to take them. Undersize it, and you pay for that decision every day it stands.
The short answer: size the building for the equipment you'll own next, not the equipment you own now. Build the biggest shell your budget allows, set the doors and eave height for tomorrow's machines, and design one end so it can grow. That's how a building becomes part of your legacy instead of something the next generation has to work around.

Start with what you'll park, not what you own
Walk the yard with a tape measure and write down every machine, truck and trailer that needs to go inside. For each one:
Measure in transport position: folded, with the header or head on if it usually stays on.
Measure the tallest point: grain tank extensions, lights, antennas and exhaust stacks. Bin extenders alone can add a foot or more to a combine, and folded tillage wings can stand taller than the combine does.
Add what's coming: the bigger planter you're eyeing, the second sprayer, the semi and grain trailer you'll want inside someday.
For a starting floor number, Purdue Extension's machinery storage guide adds a foot to each machine's width and length, multiplies them, and totals the results. Treat that as the bare minimum for parked storage. It leaves no room to walk around, hook up, or work on anything.
Width: why clear span matters more than square feet
Two buildings with the same square footage can work completely differently. A building full of posts makes you park around the structure. A clear-span building lets you park, turn and rearrange however the season demands.

This is where steel earns its keep. A red-iron frame can span 60, 80, 100 feet and well beyond with no posts in the middle. We've erected clear-span buildings 200 feet wide. Leave a center aisle wide enough to swing a tractor around without backing and filling, and you'll save time every single day.
Doors set the height of the whole building
Most people pick an eave height first and fit a door into it. It works better the other way around. Pick the door your biggest future machine needs, then build the walls tall enough to hold it.
Today's doors are bigger: farm shops used to get 20- to 24-foot-wide, 14-foot-tall doors. Farm press reports put today's norm closer to 30 to 36 feet wide and 16 to 18 feet tall, with hydraulic and bi-fold doors often 40 feet wide or more.
Overhead doors need headroom: a large sectional door's track can eat 2½ to 3 feet above the opening. In an 18-foot wall, that can mean your door tops out around 15 or 16 feet.
Hydraulic and bi-fold doors need less: a hydraulic door needs only hinge clearance, which is one reason they're popular on tall equipment doors.
Plan for lights and heaters: they hang down too, and a combine with the extensions up shouldn't have to dodge them.
A steel frame is engineered around its openings, so big doors don't weaken the wall. We routinely install overhead doors 26 feet wide and up, and build eaves of 30 to 36 feet when the equipment calls for it.
Don't forget the shop
If the building is also where you fix things, it needs room for that work on top of the parking:
A clear repair bay, so one machine can be torn down while the others keep moving
Welding area with outlets at the main doors
Parts storage, workbenches and a compressor
Office, restroom and maybe a wash bay
A staging area outside the main doors at least as wide as the building, so you can line up equipment without blocking the drive
Plan for the next generation
The best shops are planned for the people who'll run the place after you. If budget is tight, build the biggest shell you can now and finish part of it later: insulate and line the shop end first, leave the storage end cold, and add a heated floor or office when the time is right.
Ask for an endwall designed to come off, so adding bays later is a bolt-on job instead of a tear-down. Put the building where it can grow on the lot. Twenty years from now, that decision will look like foresight.
A quick sizing checklist
Measure every machine in transport position, tallest point included
List what you expect to buy in the next 10 to 15 years
Choose the door for your biggest future machine, then set the eave height around it
Decide on a clear span wide enough for a turnaround aisle
Add repair, shop and office space on top of parking
Leave staging room outside the main doors
Plan which end grows, and how
Let us help you size it
Send us your equipment list, or just a few photos of the yard and what you're running, and we'll help you work out a building that fits today and leaves room for tomorrow. If you're still deciding on the type of building, start with Pole Barn vs. Steel Building: Why Your Farm Shop Is a Legacy Decision.
Lone Star Builders builds machine sheds, farm shops and shouses from Trenton, Missouri, across North Missouri, Southwest Iowa and the surrounding states. We'll call you back within one business day.



Comments