top of page

3D Metal Building Designer

Design your own steel building online, free. Size a farm shop, machine shed, shouse or commercial building, add lean-tos and doors, then park your own equipment inside to see how it fits. When it looks right, send it to us and we will quote the building you drew.

 

A 3D building design tool for shops, sheds and shouses

  • Start from a farm shop, machine shed, shouse, workshop, commercial building or a mono slope add-on to a building you already have.

  • Set the width, length, eave height, roof pitch and bay spacing to the foot.

  • Add lean-tos, attached living quarters or an office, overhangs, wainscot and open bays.

  • Place overhead doors, walk doors and windows where you want them, and pick roof, wall and trim colors.

  • Check a combine, four-wheel-drive tractor, semi, camper or pickup against your door sizes, then switch to the frame view and see them parked inside.

 

How the building designer works

Pick a starting size and tell us how you will use the building. Adjust the floor plan until it fits your ground and your equipment. Then request a quote. We receive your layout and a picture of it, so the conversation starts from your building and not a blank page.

 

What size machine shed or farm shop do I need?

Most farmers and fleet owners start with a rough size, like a 60x100 or an 80x120, before checking how their equipment actually moves around doors, workbenches and each other.

 

A Class 8 to 10 combine with the head off stands around 13 feet tall. Once you leave room to walk around it, plan on 35 to 40 feet of length and 16 feet or more of width. A sleeper semi pulling a 53-foot van or hopper bottom needs 70 to 75 feet of clear depth just to pull straight in and close the door behind it.

 

Real-world footprints to test in the designer

2 tractors, a pickup and a work bay (40x60 to 50x80). This works well as a heated maintenance shop with 14- or 16-foot eaves, as long as the combine and semi are stored somewhere else.

 

A semi, 3 tractors and a combine (60x120 to 80x120). Once a semi, three row-crop tractors and a combine share one roof, a 60x100 fills up fast, especially if you want a wash bay, parts room or a workbench wall. An 80x120 (9,600 sq ft) with 19- to 20-foot eaves gives you drive-through bays or enough depth to turn around. Then you are not reshuffling machines every time it rains.

 

A full grain operation with a heated shop (80x150 and up, with a partition wall). Put a framed divider wall 40 or 50 feet from one end. That gives you an insulated, lined shop with a 16x16 overhead door, and the rest of the clear span stays cold storage with 24- to 30-foot-wide doors.

 

Don't guess on door height or eave clearance

Sidewall vs. endwall. A sidewall door has to fit under the eave, with about 2.5 feet of headroom for a standard-lift track. A door near the center of an endwall can rise above the eave into the gable. That lets a clear-span building take a taller door without raising the whole building. For example, on an 80-foot-wide building with a 1:12 roof pitch, the center of the endwall sits about 3 feet 4 inches above the eave.

 

Combines and sprayers. Plan on a 16-foot-tall overhead door. In a sidewall, that means at least a 19-foot eave. Centered in an endwall, it can fit on a lower building. Either way, it clears grain tank extensions and GPS receivers without folding everything down every night.

 

Semis and hopper bottoms. You need at least a 14-foot-tall door (17-foot eave in a sidewall). A 16x16 door gives mirrors and stacks safe room on an angled approach.

 

Planters and wide tillage tools. Even folded, they decide your door width. Test 20-, 24- and 30-foot openings before you lock in bay spacing. We routinely install overhead doors 26 feet wide and up.

 

Scroll back up to the 3D designer, drop in a combine, semi and four-wheel-drive tractor, and switch to the frame view to check your walk-around room.

 

Common questions

Is this a final design? No. It is a planning tool. Loads, engineering and final pricing are confirmed with your quote.

 

How big of a metal building can I design? The designer handles buildings up to 200 feet wide and 500 feet long. We have erected clear spans 200 feet wide with 36-foot eaves, and we can go larger.

 

Can I design a shouse or barndominium? Yes. Pick Shouse as the use and the designer adds living quarters attached to the shop. You can resize them, move them and change the roof-line.

 

Can I see if my equipment will fit? Yes. Add the machines you run: pickups, tractors, a combine, a 16-row corn head or 45-foot draper on its header cart, a self-propelled sprayer, a 24-row planter, a grain cart, a semi with a 53-foot trailer or a lowboy, campers and motorhomes, even a 2-post car lift with a pickup raised. The designer checks each one against your overhead doors, checks long rigs against the building depth and the car lift against the inside height, then parks them inside the frame.

 

How much ceiling height do I need for a 2-post car lift? Plan on about 12 feet 9 inches of clear height inside for a full-size pickup at full rise on a standard 2-post lift (12-foot columns, about 6 feet 10 inches of lift). In a steel building that usually means a 14-foot eave or taller. Add a car lift in the 3D designer to check your building.

 

Does the design tool cost anything? No. There is nothing to download and no account to set up.

 

Where do you build? Missouri, Iowa, Kansas, Nebraska and southern Minnesota.

 

What size shed do I need for a semi, 3 tractors and a combine? Plan on at least a 60x120 (7,200 sq ft) for tight storage, or an 80x120 (9,600 sq ft) with 19- to 20-foot eaves if you want workbenches, room to walk around, and the ability to pull one machine out without moving three others. Drop a semi, combine and four-wheel-drive tractor into the 3D designer above to test your layout.

 

What size overhead door do I need for a combine or semi truck? Plan on a 16-foot-tall overhead door, 18 to 24 feet wide, for most modern combines and high-clearance sprayers. In a sidewall, that needs at least a 19-foot eave with a standard-lift track. Centered in the endwall of a clear-span building, the door can rise above the eave into the gable. A semi needs at least a 14-foot-tall door, but a 16x16 door leaves safer room for stacks and mirrors on an angled approach.

 

Can I use this tool to design a pole barn layout? Yes. The designer is free for sizing any footprint and testing equipment clearances. We build pre-engineered red-iron steel buildings, so you can also see how a clear-span steel frame removes the interior posts a wide pole barn usually needs.

 

The right building is part of the legacy you leave. Start by drawing the one that fits how you work.

bottom of page